Note: (by tester)
I run the tests via runalltests.sh, with the float tests disabled because my machine is too slow for that.
- runtest/syscalls invokes 'cp' with the -f option to copy setuid binaries; I don't know why the binaries
are copied at all, but I changed the flag to '-p' to preserve the setuid flag; this affects some of the
chmod, chown, fchmod and fchown test cases.
- lchown2 creates an additional temporary directory and copies the setuid test program into it; unfortunately
it drops root priviledges before doing so...
- readlink04 has a race condition which makes it fail on my slow machine
I also improved the Makefile for the lchown testcases (correct dependencies) to avoid unnecessary recompiles.


-----------------------------
execve05 1 BROK : open(2) failed
getsockopt01 3 FAIL : invalid option buffer ; returned 0 (expected -1), errno 0 (expected 14)
llseek01 1 FAIL : llseek() returned incorrect value 4226032, expected 2147450276
mprotect01 1 FAIL : unexpected error - 14 : Bad address - expected 12
msgctl01 1 FAIL : qs_buf.msg_qbytes did not change
msgctl02 1 FAIL : qs_buf.msg_qbytes value is not expected
msgsnd01 1 FAIL : queue bytes != MSGSIZE
msgsnd01 2 FAIL : queue message != 1
msync05 1 FAIL : msync() fails, unexpected errno:14, expected: ENOMEM
personality01 3 FAIL : returned persona was not expected
personality01 4 FAIL : returned persona was not expected
personality01 5 FAIL : returned persona was not expected
personality01 6 FAIL : returned persona was not expected
personality01 7 FAIL : returned persona was not expected
personality01 8 FAIL : returned persona was not expected
personality01 9 FAIL : returned persona was not expected
personality01 10 FAIL : returned persona was not expected
personality01 11 FAIL : returned persona was not expected
personality01 12 FAIL : returned persona was not expected
personality01 13 FAIL : returned persona was not expected
personality02 1 FAIL : call failed - errno = 0 - Success
pipe05 1 BROK : Unexpected signal 11 received.
pread02 2 FAIL : pread() returned 0, expected -1, errno:22
pwrite02 2 FAIL : specified offset is -ve or invalid, unexpected errno:27, expected:22
semop02 2 FAIL : unexpected error - 27 : File too large
setgroups03 1 FAIL : setgroups() fails, Size is > NGROUPS, errno=1, expected errno=22
shmat01 2 FAIL : shared memory address is not correct
shmdt02 1 FAIL : call succeeded unexpectedly
signal03() 30 FAIL : signal03() call failed - errno = 22 : Invalid argument
signal03() 31 BROK : Remaining cases broken
signal05() 31 FAIL : signal05() call failed - errno = 22 : Invalid argument
FAIL - ar with -v flag failed to print a line for each file
FAIL - ar with -v failed to produce a verbose out put
sem02: FAIL
pan reported FAIL
-----------------------------