Linux Test Project

commit b6fb452addaa6a33dcb37c101879b8b5e1e0c34c  (HEAD, tag: v1.13, master)
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Mon Dec 19 15:20:40 2016 +0100

    lcov: Finalize release 1.13
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit daca8d9febe52ccf1976240a3b48ffc350dec902  (origin/master, origin/HEAD)
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Mon Dec 19 14:36:00 2016 +0100

    geninfo: Fix 'unexpected end of file' error
    
    Use the compiler version as stored in the .gcno file to determine if
    the file contains function records with split checksums. This fixes
    the following problem that can occur when lcov is run using a gcov
    tool of GCC version 4.7 and above on .gcno files compiled with a
    version below 4.7:
    
      # lcov -c -d . -o test.info --initial
      [...]
      geninfo: ERROR: test.gcno: reached unexpected end of file
    
    Also add missing lcov version to --debug output.
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit a90d50e97cb49ea712c94d91cdef1cc21a3c7986 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Wed Dec 14 11:00:08 2016 +0100

    lcov: Remove use of install -D option
    
    Some versions of the install tool don't support the -D option, causing
    a 'make install' call to fail. Fix this by replacing the -D option with
    two calls to install, first to create all target directory components,
    then to install the actual files.
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
    Reported-by: <deanyang@tencent.com>

commit 6ec3f2398d22e605c1a8019541fb32d26d18044b 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Fri Oct 7 09:47:35 2016 +0200

    genhtml: Fix warning with small genhtml_line_field_width
    
    On systems with Perl versions 5.21 and above, genhtml prints a warning
    similar to the following during processing:
    
      genhtml: Negative repeat count does nothing at bin/genhtml line 3854,
               <SOURCE_HANDLE> line 4.
    
    This is due to size calculations resulting in a negative number of
    padding characters when genhtml_line_field_width is lower than the size
    of the strings to pad (9). Fix this by disabling padding in these cases.
    
    Reported-by: xaizek@openmailbox.org
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit d7cc7591b3a7cc1ec95371d04e4fc46f10b3fd54 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Tue Oct 4 09:50:52 2016 +0200

    geninfo: Fix gcov version detection for XCode 8.0
    
    The LLVM gcov version included in XCode 8.0 reports its version in a
    format that is not understood by geninfo, resulting in the wrong format
    of coverage data files being expected. Fix this by reworking gcov
    version detection in geninfo to be more robust.
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit 68320d932c5ee5537ae1c287fe52603ae2fecf8c 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Mon Aug 22 15:54:56 2016 +0200

    lcov: Update installation mechanism
    
    Change default installation location to /usr/local to prevent
    conflicts with files installed by package managers (reported by
    Gregory Fong). To achieve this, rename PREFIX to DESTDIR and
    introduce actual PREFIX Makefile variable and update spec file
    to install packaged files to previous locations.
    
    Also fix spec file to not announce ownership of system directories
    (reported by and based on patch by Jiri Kastner <jkastner@redhat.com>).
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit 04a3c0ed1b4b9750b2ac5060aac0e6d5a3b9da7f 
Author: Benoit Belley <benoit.belley@autodesk.com>
Date:   Mon Apr 4 18:16:54 2016 -0400

    Pass --no-strip-underscore to c++filt on OS X
    
    * The --no-strip-underscope flag is necessary on OS X so that symbols
      listed by gcov get demangled properly.
    
       From the c++filt man page: "On some systems, both the C and C++
       compilers put an underscore in front of every name.  For example, the
       C name "foo" gets the low-level name "_foo". This option tells c++filt
       not to remove the initial underscore.  Whether c++filt removes the
       underscore by default is target dependent."
    
    Signed-off-by: Benoit Belley <benoit.belley@autodesk.com>

commit 632c25a0d1f5e4d2f4fd5b28ce7c8b86d388c91f 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Tue Mar 8 10:51:51 2016 +0100

    lcov: Fix output files being created in / directory
    
    When a warning is emitted by lcov before creating an output file,
    e.g. when a negative coverage count was found while combining
    tracefiles, lcov tries to create the output file in the root
    directory (/) instead of the current working directory.
    
    This is a result of lcov's warn handler calling a temp file cleanup
    routine that changes directories to / before trying to remove its
    temporary directory.
    
    Fix this by removing the temp cleanup call from the warn handler.
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit e32aab1b4c85503a6592a91326c4b362613e1d66 
Author: Gabriel Laskar <gabriel@lse.epita.fr>
Date:   Wed Feb 10 09:56:18 2016 +0100

    lcov: Fix --remove pattern matching
    
    The --remove option of lcov now consider the pattern passed as parameter
    as a full path, and not only a part of the filename.
    
    This behavior was discovered by using AX_CODE_COVERAGE[1] m4 macro from
    a directory in $HOME/tmp. The macro itself calls lcov with
    `--remove "/tmp/*"`.
    
    [1]: https://www.gnu.org/software/autoconf-archive/ax_code_coverage.html
    
    Signed-off-by: Gabriel Laskar <gabriel@lse.epita.fr>

commit 79e9f281ea893b2f6498b4bad79173b1414aa055 
Author: Reiner Herrmann <reiner@reiner-h.de>
Date:   Fri Oct 30 20:26:59 2015 +0100

    lcov: use UTC to get timezone-independent date
    
    The date is used for updating the time inside manpages.
    If localtime is used, the date could vary depending on the user's
    timezone. To enable reproducible builds, UTC is used instead.
    
    Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>

commit de33f51b49dc6d01a285aa73990f03e7d982beb2  (tag: v1.12)
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Mon Oct 5 17:37:40 2015 +0200

    lcov: Finalize release 1.12
    
     - Use full git describe output as tool version
     - Update version numbers and last-changed-dates in man pages,
       spec and README file
     - Replace static CHANGES file with git log
     - Switch Makefile logic to use mktemp for generating a temporary
       directory
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit 1ad4f7779b7721e311e552209e110e08bbf18fa1 
Author: Denis Abramov <abramov.denis@gmail.com>
Date:   Mon Sep 21 09:29:20 2015 +0200

    geninfo: Added support for Xcode 7.0 gcov version handling
    
    With Xcode 7.0 LLVM gcov keeps version information on the first line.
    E.g. gcov --version yields: Apple LLVM 7.0.0 (clang-700.0.65)
    
    Signed-off-by: Denis Abramov <abramov.denis@gmail.com>

commit c3602ea8e598deda4afff603bb123caa98eef159 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Mon Aug 3 11:05:51 2015 +0200

    genhtml: Allow prefix paths with spaces
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit a3572971367198ef0febe476052640bd09bec931 
Author: Gilles Gouaillardet <gilles@rist.or.jp>
Date:   Thu Jul 30 14:11:57 2015 +0900

    genhtml: support a comma separated list of prefixes
    
    the --prefix option of genhtml now takes a comma separated list of prefixes
    instead of a single prefix.
    this can be required when running lcov vs projects configure'd with VPATH
    and in which source files are both in the source and build directories.
    
    Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>

commit 997f32ae85717cd47d2305d7cd7ccce3ffa1abe6 
Author: Gilles Gouaillardet <gilles@rist.or.jp>
Date:   Tue Jun 23 14:28:22 2015 +0900

    Fix find command line
    
    find xxx -name \*.gcda -type f -o type l
    does return :
    - all files with the .gcda suffix
    - all symbolic links
    
    the updated command line now returns
    - all files with the .gcda suffix
    - all symbolic links with the .gcda suffix
    
    Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>

commit 533db4e78b54ae01e023d00c1fec5dddaaaf37e6 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Wed Jun 17 17:54:20 2015 +0200

    lcov: Fix capture for package files containing graph files
    
    Depending on whether package files contain graph files, data should be
    collected from the unpacked package file directly, or from the build
    directory after linking data files. This approach fixes problems when
    capturing coverage data via a package from a directory containing graph
    files.
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit a2a8b376ec5e9e5082a0cbb935137d6a8f526870 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Wed Jun 17 17:34:33 2015 +0200

    lcov: Fix .build_directory file not being deleted
    
    Using option --to-package while capturing coverage data creates a
    temporary file named ".build_directory". Currently this file is not
    properly removed at the end of processing due to a changed CWD. This
    patch fixes this problem by reverting to the original CWD before trying
    to remove the temporary file.
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit b9de825f1fe018f381c8859ee0f3f4af15122c7a 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Tue Jun 16 13:53:00 2015 +0200

    lcov: Enable userspace package capture with only data files
    
    Previously lcov's --from-package capture mechanism required
    that .gcno files and source were present on the test machine.
    
    This patch modifies --from-package capturing to work when
    only .gcda files are present in the package captured on the
    test machine. It works by linking the .gcda files collected
    on the test machine into their natural location on the build
    machine. This requires existing .gcda files to be removed.
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit 0e4f0908aed3e1a071d5435c36c18cd493f0c309 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Tue Jun 16 13:33:54 2015 +0200

    lcov: Make package handling more robust
    
    Apply some changes to --from-package and --to-package handling
    to better handle failures:
    
     - Abort if tar tool is not available
     - Abort if no data file is found in package file
     - Ensure that temporary directories can be deleted
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit f87d980929a5a06d49d0a6856f6c3314418c27ef 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Tue May 12 17:28:44 2015 +0200

    genhtml: Rework c++filt name demangling
    
    When running genhtml with command line option --demangle-cpp, do not
    merge function call data based on demangled function names. Instead mark
    duplicate function entries in the function view with a version suffix
    (.<number>). This resolves problems with entries for functions that
    demangle to the same name, but begin on different lines according to GCC
    (e.g. virtual destructors).
    
    Reported-by: Lukasz Czajczyk <lukasz.czajczyk@gmail.com>
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit 2e872175cbba2c09c9025da2660edf0b4abb55cb 
Author: Daniel Fahlgren <daniel@fahlgren.se>
Date:   Wed Apr 22 15:17:10 2015 +0200

    geninfo: make line exclusion markers configurable
    
    This patch exposes the variable $excl_line and $excl_br_line so they can
    be set in the configuration file. It is not always possible to add the
    exclusion markers to the code with reasons like third party code,
    company policy, legacy code, no commit access etc.
    
    One obvious use case is to exclude assert() from the branch coverage and
    abort() from line coverage. They are never meant to be triggered unless
    something is wrong. Other use cases can be custom error handling macros
    or macros that depend on endianness, like htons().
    
    Signed-off-by: Daniel Fahlgren <daniel@fahlgren.se>

commit 10b11eaa178976d1433007adb2188d05b8605be6 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Mon Nov 10 17:17:23 2014 +0100

    geninfo: Ignore empty .gcno files with --initial
    
    Some versions of GCC create empty .gcno files which cause geninfo
    to abort processing with an error message:
    
      geninfo: ERROR: dummy.gcno: reached unexpected end of file
    
    Fix this problem by skipping empty .gcno files.
    
    Reported-by: Maarten Hoes <hoes.maarten@gmail.com>
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit f9d8079646aa906518c4ab7d326504e6837532a7 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Mon Nov 10 16:54:08 2014 +0100

    lcov: Fix warning when specifying --rc
    
    Current Perl versions report the following warning when using the --rc
    option of lcov:
    
      lcov: Use of each() on hash after insertion without resetting hash
      iterator results in undefined behavior
    
    Fix this warning by not modifying the hash variable that is being
    iterated on. Also add the missing whitespace fix-up of --rc parameters
    to genhtml.
    
    Reported-by: Maarten Hoes <hoes.maarten@gmail.com>
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit 2a634f6caa98f979606189ec3ee98f4cac270b97 
Author: Philip Withnall <philip.withnall@collabora.com>
Date:   Mon Nov 10 14:58:34 2014 +0000

    genhtml: Support relative source filenames in SF keys
    
    Some tools which generate .info files generate relative filenames for
    the ‘SF’ keys. For example, nodeunit’s lcov output does. When genhtml is
    run with --output-directory, it calls chdir() which breaks relative
    lookup of the source files. Fix that by resolving all source filenames
    to absolute paths when loading an info file, resolving any relative ones
    using the info file’s path as a base.
    
    Signed-off-by: Philip Withnall <philip.withnall@collabora.co.uk>

commit b4344c6a5d3c434ca0d801c197a09cfdeecb3f32 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Fri Sep 26 13:11:18 2014 +0200

    man: Add description for --precision and genhtml_precision
    
    Add man page sections for genhtml's command-line option --precision
    and lcovrc configuration setting genhtml_precision. Also add an
    example configuration setting in lcovrc.
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit aa1217412f1e8b540010fea5ca9844b9e4699e54 
Author: Euccas Chen <euchen@qti.qualcomm.com>
Date:   Fri Sep 26 12:53:29 2014 +0200

    genhtml: Implement option to specify coverage rate precision
    
    Add command line support and config file support for specifying the
    coverage rate precision, valid precision range: [1,4].
    
    Signed-off-by: Euccas Chen <euchen@qti.qualcomm.com>

commit 4d4eba1a8b5e7d2a6c5e93c0a50264da1a5c5540 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Wed Jun 25 09:41:59 2014 +0200

    get_version.sh: Remove - characters from release string
    
    Replace - with . in release strings to fix the following build
    error in the dist Makefile target:
    
      error: line 4: Illegal char '-' in: Release: 4-g1d44b2a
      make: *** [rpms] Error 1
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit ffbd3e08cc0871842b2205b0b73c2ae8f3ad02e8 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Wed Jun 25 09:25:50 2014 +0200

    genhtml: Improve demangle error message
    
    Improve error message that is shown when there are mangled function name
    entries on different lines that demangle to the same clear text function
    name.
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit 1d44b2a090aa933b15e4cafc1a440ccb390df92e 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Tue Jun 24 17:45:34 2014 +0200

    geninfo: Fix error when using --demangle-cpp
    
    Using genhtml's --demangle-cpp option on data produced with recent GCC
    versions (at least 4.8 and 4.9) can result in an error message similar
    to the following:
    
      genhtml: ERROR: Demangled function name _ZN3subD2Ev  maps to different
               lines (5 vs 4)
    
    The reason for this error is an unexpected sequence of lines records
    in a .gcno file. These records mention line numbers as belonging to a
    function which occur before the initial line number of that function
    as reported by the corresponding function record.
    
    Fix this problem by retaining the order of lines belonging to a function
    as found in the .gcno file. This way geninfo will consistently use the
    initial line number as reported by the function record when merging
    function data during the demangling process.
    
    Reported-by: Alexandre Duret-Lutz <adl@lrde.epita.fr>
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit 566e5ec7e69a03612e1ed4961779d939af180d66 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Wed Jun 18 16:05:29 2014 +0200

    lcov: Remove unused files
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit c76172bfe630520e217ecc0bca8f18481c4c33b0 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Wed Jun 18 16:01:05 2014 +0200

    README: Fix typo
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit a6b10a41056cd10c7b735e259fee81f1865c2109 
Author: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date:   Wed Jun 18 15:50:04 2014 +0200

    lcov: Remove CVS artifacts
    
    Replace CVS specifics in the build environment and tools source with
    Git mechanisms:
     * CONTRIBUTING and README file now refer to github for the primary
       source location
     * When run from a Git repository, the tools dynamically determine the
       Git version using 'git describe'
     * When installed into the file system, the version information is
       fixed with the current Git version
     * When preparing distribution files, the version at the time of
       preparing the files is written to file ".version"
    
    Also add a .gitignore file to filter out the most frequent temporary
    file types.
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit fa2a991cf6fad37fec7650b95be705df143e058a  (tag: v1.11)
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri May 23 08:56:17 2014 +0000

    lcov: finalizing release 1.11

commit e2729beea0d7769ef0e992c27a294b0742a6ac77 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri May 23 08:47:10 2014 +0000

    CHANGES: update

commit 866d187602bfc2e3a8199f4e9e9430ef38f106a8 
Author: Jeffrey Hutzelman <jhutz@cmu.edu>
Date:   Tue May 20 14:12:55 2014 +0000

    lcov: Sort branches in unnamed blocks first
    
    When processing branch coverage data, consider branches in "unnamed"
    blocks to come before other blocks on the same line, so that they
    appear in the correct order in HTML output.
    
    This is accomplished by using block number -1 for unnamed blocks,
    instead of 9999 as was previously done.  In branch data vectors, this
    is reprsented by the value $BR_VEC_MAX, which is defined to be the
    largest value representable in the field width used.  This same value
    is also used in .info files, for backward-compatibility with regular
    expressions used to parse these files.  As a result, .info files
    generated by versions of lcov with this change can be read by older
    versions, though branch results will still appear out of order.
    
    Signed-off-by: Jeffrey Hutzelman <jhutz@cmu.edu>

commit 17c0edec32193b9e8058908447d3eb403d76c8de 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu May 15 10:23:45 2014 +0000

    lcov: Update man page
    
    Add missing description for command line parameter value.
    
    Reported-by: sylvestre@mozilla.com

commit c0958139e015805cce15b60b740c735690ad4002 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Apr 14 12:14:55 2014 +0000

    genhtml: Implement option to allow HTML in test description
    
    Add lcovrc directive genhtml_desc_html to allow using HTML markup in
    test case description text.
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit 4f2c3aefcfcf816806da83a8609bd743eb227d37 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Apr 14 11:24:05 2014 +0000

    genhtml: Check for proper description file format
    
    Ensure that description files contain test name lines before test
    description lines. This fixes a "use of uninitialized value" warning
    in genhtml.
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit 3a68239905c28a7c3bfac52172a254872d6a7aa7 
Author: Jonah Petri <jonah@petri.us>
Date:   Mon Apr 14 11:06:21 2014 +0000

    lcov: make geninfo compatible with LLVM's gcov
    
    These changes are needed to make geninfo compatible with LLVM's gcov:
    * Use --version rather than -v to probe version info
    * Convert LLVM gcov version numbers to the GCC gcov version they emulate
    * Translate short options into their equivalent long option capabilities
    
    Signed-off-by: Jonah Petri <jonah@petri.us>

commit a74bdeeae0383b197b1dafa44d01a54129fb3d7c 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jan 8 13:26:04 2014 +0000

    genhtml: Reduce hash copying while adding up files
    
    Reduce copying effort and memory usage. Based on similar patch for
    lcov by olly@survex.com.
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit c6b4d91fdf667cfca17213742e2e04f6281ebed4 
Author: Olly Betts <olly@survex.com>
Date:   Wed Jan 8 13:14:05 2014 +0000

    lcov: Avoiding copying hashes passed to add_counts function
    
    This patch reduces memory usage - without it lcov was failing every time
    for me with out of memory errors in a VM with 1GB of RAM and 1GB of
    swap, but with it lcov completes every time.
    
    It's presumably also faster to avoid these copies.
    
    Signed-off-by: Olly Betts <olly@survex.com>

commit cf6f2e685510da62bd2eb1f386f71d57c41f4594 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Dec 13 16:09:05 2013 +0000

    geninfo: Tolerate garbage at end of gcno file
    
    Some versions of gcc produce garbage at the end of a gcno file
    when recompiling a source code file after removing some lines.
    
    This patch makes geninfo's gcno file parser more robust by assuming
    end-of-file when it finds a record that extends beyond the end-of-file.
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit 14286b29d076208452da6021c792ebf43552ac2c 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Dec 13 15:23:27 2013 +0000

    geninfo: make gcov tool version detection more robust
    
    Don't consider gcov tool version information in parenthesis when
    determining the gcov tool version. This fixes problems where the
    version string contains a different version number in parenthesis
    before the actual gcov version.
    
    Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>

commit 0bde87338cd155af46804d77701c93ef263c3d53 
Author: Sebastian Stigler <s_stigler@gmx.de>
Date:   Fri Dec 13 15:09:58 2013 +0000

    geninfo: add exclude marker for branch coverage
    
    Sometimes it can be helpful to generally use branch coverage but to
    disable it for some lines of code without excluding the line or function
    coverage too.
    
    For example if you make heavily use of assertions in your code (which is
    generally a good idea) you will see that for each 'assert(...)' exist
    one branch which is taken and one that is not. Similarly you can see the
    same phenomenon for 'delete' in C++ code.
    
    If you use the 'LCOV_EXCL_LINE' marker in such a situation both of these
    branches will be omitted from the output. But in doing so, you loose the
    ability to determine if this peace of code is genuine 'dead code' or not
    because the line coverage is omitted too.
    
    The newly introduces 'LCOV_EXCL_BR_LINE', 'LCOV_EXCL_BR_START' and
    'LCOV_EXCL_BR_STOP' marker address this problem. The usage is similar to
    the 'LCOV_EXCL_LINE' etc. markers.
    
    Signed-off-by: Sebastian Stigler <s_stigler@gmx.de>

commit 119be727596f567e83b03de384b4150b926911a3 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Dec 12 14:58:44 2013 +0000

    geninfo: Fix handling of non-english locales
    
    geninfo expects gcov output in the default C locale. This isn't always
    given, for example when running in an environment where variable
    LANGUAGE is set to a non-english locale. In such cases gcov output
    cannot be correctly parsed, resulting for example in the absence of
    branch coverage data.
    
    gcov uses gettext() for writing internationalized messages. The info
    page for gettext mentions the order in which locale-defining
    environment variables are evaluated:
    
    LANGUAGE
    LC_ALL
    LC_MESSAGES
    LANG
    
    In addition, gettext implements special handling where LC_ALL=C takes
    precedence over LANGUAGE.
    
    geninfo currently only specifies LANG=C. Fix the issue by specifying
    LC_ALL=C instead.
    
    Based on fix suggestion by Sebastian Stigler.
    
    Reported-by: Sebastian Stigler <s_stigler@gmx.de>

commit 0f7bb3ebc8487b83ce9b7047c81a3655135876ea 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Dec 9 15:49:35 2013 +0000

    lcov: Added contribution guidelines

commit f83688fe27f133ef02e9ab47a435d6a5d2074932 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Aug 2 07:29:20 2013 +0000

    geninfo: fix --no-external not working with --initial
    
    When running lcov --capture --initial together with --no-external.
    the --no-external has no effect. Fix this by applying the external
    filtering also for graph files.
    
    Reported-by: malcolm.parsons@gmail.com

commit 6a8a678046bd75aa81d30484b1817425022d71e5 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Jul 1 11:49:46 2013 +0000

    lcov: fix --config-file not being passed to geninfo
    
    Calling lcov to capture coverage data while specifying --config-file
    will result in the configuration directives of that file not being
    used during data collection.
    
    Fix this by ensuring that --config-file is passed on to geninfo.
    
    Reported-by: liuyhlinux@gmail.com

commit c3be5b6859ef280b469b6b75cf4709fc35f91ced 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu May 2 11:02:24 2013 +0000

    lcov: fix whitespace handling in --rc command line option
    
    Specifying blanks around --rc options results in the options not
    being correctly recognized, for example:
    
    This doesn't work:
    geninfo . -o - --rc="geninfo_adjust_src_path = /tmp => /usr"
    
    This works:
    geninfo . -o - --rc="geninfo_adjust_src_path=/tmp => /usr"
    
    Fix this by automatically removing whitespaces at the start and end
    of --rc options and values.

commit 4699f8d391325335777ed234e388be2e2f87478c 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Apr 12 07:51:34 2013 +0000

    README: improve usage hint

commit 36e0539737198ad1bee51103f47842f13c575239 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Mar 13 10:28:07 2013 +0000

    genhtml: add time to date string
    
    Add the current time to the date information in the HTML output
    generated by genhtml. This way users can differentiate results when
    creating HTML output multiple times a day.
    
    Based on patch by sylvestre@debian.org.

commit 38fbe93c8cd8402be8e4821825fdeeaa23e8367c 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Feb 22 14:09:08 2013 +0000

    geninfo: don't warn about missing .gcov files
    
    Newer versions of gcc remove .gcov files for source files that do
    not contribute instrumented lines. Remove the
    
      WARNING: no data found for file.c
    
    warning that geninfo issues in this case.

commit 29346542c30af221a2ffdfe097fbd858044b712a 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Feb 1 11:44:03 2013 +0000

    genhtml: fix handling of user-specified prefixes with trailing /
    
    A trailing / in a user-specified prefix is not correctly recognized.
    Fix this by removing any number of trailing / in a user-specified
    prefix. Reported by ahmed_osman@mentor.com.

commit 5241e2afadca5f172bd0b8cafe61e20d2153f0bf 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jan 30 11:46:42 2013 +0000

    lcov: fix bug when converting function data in --diff operation
    
    When a patch is applied to a tracefile using command line option --diff
    and the patch changes the list of functions, the operation aborts with
    the following error:
    
      lcov: Use of freed value in iteration at lcov line 3718.
    
    Fix by applying missing calls to keys() when iterating function data
    hashes. Reported by Nasir.Amanullah@us.fujitsu.com.

commit 9ce8d8cb4f978eb80fb88ecafd52e869fab75d8f 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 25 16:30:25 2013 +0000

    lcov/genhtml: fix outdated comment regarding data structure

commit c85e73a36e3f8c4e7fab888ac1536bee94a6fe56 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 25 16:29:30 2013 +0000

    genhtml: merge function data during demangling
    
    Merge function execution counts when multiple function names demangle
    to the same name.

commit 2dfafc99c1eccbb81066436845e06a868eb3c434 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 25 11:46:28 2013 +0000

    genhtml: improve function table sorting
    
    In the function table view, the initial view should show the functions
    sorted by execution count because - unlike with file names - the function
    name is not a natural order for functions (the line number would be,
    but that is not available). Also sort functions with the same execution
    count alphabetically for a stable order.
    
    Base on a suggestion by paul.bignier@hotmail.fr.

commit 331a29011709a27d2ec11c6cbd6ac51dfdaf70c6 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jan 23 16:52:06 2013 +0000

    genhtml: consolidate calls to c++filt
    
    When using --demanglecpp, call c++filt only once instead of per
    function. This approach can reduce the run-time for source files
    with a lot of overloaded functions significantly. Based on idea
    by olly@survex.com.

commit 49b877160b1d28cd6c3d8332d5d47c9c74420070 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Jan 10 09:02:32 2013 +0000

    geninfo: make empty data directories non-fatal
    
    Emit a warning when no data file is found in a data directory
    to allow processing of additional directories.
    
    Based on suggestion by rich_drake@yahoo.com.

commit 3836c162c2864ed180df7d80fa03c70d17102edc 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Nov 13 09:58:53 2012 +0000

    geninfo: fix parsing of gcc 4.7 gcov format
    
    GCC 4.7 changes the gcov format for lines which can only be reached
    by exceptions to "=====" instead of "#####". This results in the
    following warning:
    
    geninfo: Argument "=====" isn't numeric in numeric gt (>) at geninfo
    line 1281.
    
    Fix this by handling "=====" correctly.

commit b932f94cc83c3df169c76689533336bba4de4dba 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Oct 10 09:14:17 2012 +0000

    lcov.spec: back to CVS version

commit 6af00fa26e1a91a39c873ff9fa6df7fb8830ec42 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Oct 10 09:12:42 2012 +0000

    lcov.spec: fix Perl dependency

commit 4eac16e93db328e86e44da40e3d5e96a0301d361 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Oct 10 08:36:16 2012 +0000

    lcov: update CVS version to 1.11-pre1

commit b5c1bdddd1380be3ad12952ed2747df3744e227e 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Oct 10 08:20:21 2012 +0000

    lcov: finalizing release 1.10

commit 089861768a94d0f6e827539c828f19141092f529 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Oct 10 08:07:54 2012 +0000

    CHANGES: update

commit 9037de17458c5d9767d201bd0599d40347a9bc41 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Oct 10 08:07:01 2012 +0000

    genhtml: handle source files in root directory gracefully

commit 68dd0f19da0d8d6e82375e09b97f7ffc22847db4 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Oct 9 13:58:22 2012 +0000

    geninfo: add automatic detection of base directory
    
    Add a heuristic to automatically determine the base directory
    when collecting coverage data. This heuristic should cover many,
    if not most cases of build systems moving files around during
    compilation (e.g. libtool, automake, etc.). The heuristic can be
    enabled or disabled using the configuration file directory
    'geninfo_auto_base'.

commit 631d2b11bfde56ffca4568382abf5d90653c4141 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Oct 8 15:03:23 2012 +0000

    geninfo: fix missing line data after last commit

commit b1e14c4a1a0f3ccaad0c665f439624cf4588a68d 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Oct 8 13:02:45 2012 +0000

    lcov: add missing help text for option --rc

commit a432efff6ee8485ec0724aca4eae79a4c390a328 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Oct 5 15:53:09 2012 +0000

    lcov: updated CHANGES file and copyright years

commit 897322ecdb858f18e4a12f4716bbb08c067b6c9c 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Oct 5 15:20:41 2012 +0000

    geninfo: fix warning about unhandled .gcov files
    
    gcov will sometimes create .gcov files that contain no instrumented
    line. When geninfo reads .gcno files it filters out such files,
    resulting in the following warning:
    
    geninfo: WARNING: cannot find an entry for #path#to#file.gcov in
             .gcno file, skipping file!
    
    Avoid this warning by not filtering out non-instrumented lines.

commit 37d381ae99a66f59ea55d966f1da13a726d2efe8 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Oct 5 15:09:58 2012 +0000

    genhtml: fix source path prefix calculation
    
    Fix the following problems of the algorithm used to identify an
    optimal source path prefix:
    - the last two path components (filename and first parent
      directory) are ignored when trying to identify the optimal
      prefix
    - if a path prefix matches a longer path prefix, the weight
      of the filenames associated with the latter is incorrectly
      attributed to the former

commit 263de2b40e21193ef8d11e899eb55aa52b17225d 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Oct 5 12:00:57 2012 +0000

    lcov: set default for branch coverage data to disabled
    
    Collecting branch coverage data can significantly slow down
    coverage data collection and processing of data files. Assuming
    that most users are more interested in line/function coverage,
    change defaults to not collect/process branch coverage data.
    
    Users can still override this default using lcov_branch_coverage=1
    in the lcovrc file or command line option --rc lcov_branch_coverage=1

commit 7e04a152683ff66e24b87f2125474c6765d4524b 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Oct 5 11:49:30 2012 +0000

    geninfo: fix problems with adjust_src_path option
    
    Fix the following problems with adjust_src_path:
    
     * specifying --compat libtool=on and geninfo_adjust_src_path
       unexpectedly sets --compat libtool=off
     * path components that are assembled from sub-directory names are
       not correctly adjusted

commit 74e4296b6e2a0b0f164c6828c28cc82449344f08 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Oct 5 08:23:06 2012 +0000

    lcov: add setting to disable function and branch coverage
    
    Add two new configuration file settings:
    
     * lcov_function_coverage and
     * lcov_branch_coverage
    
    When set to zero, lcov will skip the corresponding coverage data
    type from being collected or processed, resulting in reduced
    memory and CPU time consumption and smaller data files.

commit 37bc1a1a5f721c6b88fff4c63121c1cbb794c14f 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Oct 2 14:29:57 2012 +0000

    lcovrc: clarify meaning of geninfo_external in man page

commit fc4b9e21efe8f3409d9b0b90cfe7a3e8bc59a74c 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Oct 2 09:12:38 2012 +0000

    geninfo: fix processing of pre-3.3 gcov files
    
    When trying to collect coverage data for programs compiled with
    GCC versions prior to 3.3, geninfo skips each data file with the
    following warning:
    
    geninfo: WARNING: cannot find an entry for test.c.gcov in .bb file,
    skipping file!
    
    Fix this by deriving the source code filename from the gcov filename
    in case the gcov files do not follow the GCC 3.3 format.
    
    Reported-by: georgysebastian@gmail.com

commit d1014dfcabfee2f305278a14ec8e5343e3889139 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Aug 24 11:43:18 2012 +0000

    lcov: fix problems with --rc option
    
    Fix error "Invalid option linkage for \"rc=s%\"" when running lcov
    with an older version of the Getopt::Long module. Also pass --rc
    options through lcov to geninfo.

commit a9f08b79e2e7ec2b4a5c9ad27a077df8dfb46890 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Jul 24 15:41:38 2012 +0000

    geninfo: implement rc option geninfo_adjust_src_path
    
    Provide a new lcovrc file option geninfo_adjust_src_path that users
    can use to change incorrect source paths.
    
    Inspired by patch by ammon.riley@gmail.com.

commit 108f805788590defda99fdf252bfb71cb749f31e 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Jul 19 13:12:35 2012 +0000

    lcov: implement command line option --rc
    
    Users can now use command line option --rc to override configuration
    file directives.

commit eeeeeca74706e88a9b8ecfef2bb3451957512e20 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jul 18 12:56:21 2012 +0000

    lcovrc: add description for geninfo_compat setting

commit f842e46149b48ff316e80f68f630bf94085e4d19 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jul 18 12:40:56 2012 +0000

    lcov: improve --compat description

commit 392a690ba31092857f7d21d0008783d87954ebce 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jul 18 12:13:00 2012 +0000

    lcov: add missing documentation for --compat option
    
    Add missing sections in the geninfo and lcov man-pages for the
    newly introduced command line option --compat. Also set the
    default value for the hammer compatibility mode to 'auto' to
    keep the behavior of previous releases.

commit 691cab3e3aaebc295c2cfe91c43c6a7c48f1ec2b 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jul 18 10:40:12 2012 +0000

    lcov: fix extra closing parenthesis in comment

commit cef6f0ff8baa9b2b3dfb437463e7a88d3380b555 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Jul 17 11:37:13 2012 +0000

    lcov: make 0%/100% exclusive to no/full coverage rate
    
    Ensure that coverage rates 0% and 100% are only used when no or all
    lines/functions/branches are hit respectively. This approach is
    implemented to allow better identification of boundary cases, and
    to be in accordance with the behavior of the gcov tool.
    
    Based on suggestions by: Paul.Zimmermann@loria.fr and
    vincent@vinc17.net

commit 9cec8f7e332258c9128f1c53d61acb9f0bc17085 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jul 11 14:09:27 2012 +0000

    geninfo: more improvements to the .gcno format auto-detection
    
    Suggestions by garnold@google.com:
    - rename command line setting
    - simplify logic

commit 0bbca3bd0c1ad3e3d3fd0b6eebfc3afbbc212a85 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jul 6 14:29:27 2012 +0000

    geninfo: rename compatibility setting to compatibility mode

commit f30fb978662996e29517c733218292a91f5fd12b 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jul 6 09:03:27 2012 +0000

    geninfo: improve detection of gcc 4.7 function records
    
    Suggestions by garnold@google.com:
    - perform detection only once
    - add warning in case detection is off but overlong strings are found
    
    Misc:
    - add help text for --compat
    - isolate detection heuristic into separate function
    - rename corresponding compatibility setting to "gcc_4_7"
    - allow "android_4_4_0" as alias for "gcc_4_7"

commit 01321c3f170e5d24ffb3bb998441c99f5b775836 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jul 4 16:06:10 2012 +0000

    geninfo: enable auto-detection of gcc-4.7 function record format
    
    gcc-4.7 introduced a modified function record format. This format
    is in use by android toolchains and has also been ported to some
    pre-4.7 versions of gcc. Introduce a heuristic-based auto-detection
    to correctly handle .gcno files in these cases.

commit d929600a0e2133168085e5ddea7ee832afd902b7 
Author: Martin Hopfeld <martin.hopfeld@sse-erfurt.de>
Date:   Fri Jun 8 14:19:49 2012 +0000

    geninfo: Make geninfo work more reliably on MSYS
    
    Using the lcov tools on Win7 with MSYS and MinGW 4.5.1/4.5.2
    raised some issues for us:
    
    geninfo created in the for one source file in the 'SF:' line
    paths starting with a lowercase drive letter and sometimes
    starting with uppercase drive letters.
    
    This lead to inaccurate coverage results on the MSYS platform.
    
    This patch fixes this issue.

commit 5b2751854aa19e6443fdc5fecc139595988d1e99 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon May 7 16:04:49 2012 +0000

    lcov: add perl version dependency to RPM spec file
    
    lcov CVS (1.10 pre) seems to be broken on MSYS with perl 5.6.1.
    The issue is the following:
    
      genhtml: Unknown open() mode '>>&' at /usr/bin/genhtml line 5512.
    
      $> perl genhtml --version
      genhtml: LCOV version 1.10 pre (CVS 1.58)
    
      $> perl --version
      This is perl, v5.6.1 built for msys
    
    Fortunately perl v5.8.8 is available for MSYS and genhtml works like a
    charm with that 'new' version.
    
    Reported-by: Martin Hopfeld <martin.hopfeld@sse-erfurt.de>

commit 83957a145d243cad0f8060e4a9ccc6cb8ed8fc09 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Apr 10 11:48:52 2012 +0000

    geninfo: add support for gcc 4.7 .gcno file format
    
    Based on patch by berrange@redhat.com.

commit 91c91dbc63d1e880d106919300c2fb37737697b0 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 20 11:53:57 2012 +0000

    lcov: add new command line option --compat
    
    Add new option to lcov and geninfo to specify compatibility settings.
    
    Supported settings:
      libtool: same as --compat-libtool
      hammer: gcc3.3 hammer patch compatibility
      android_4_4_0: android toolchain 4_4_0 compatibility

commit 9588355790a302da680eff2f664058f78439a03e 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Aug 11 08:29:21 2011 +0000

    lcov: fix problem with Objective-C functions
    
    Fix geninfo not recognizing function entries for Objective-C functions.
    
    Based on patch by abrahamh@web.de:
    current version of lcov unfortunately not support Objective-C files.
    In details the count of tested function is zero always and the annotated
    lines have an offset by one if the Objective-C method have one ore more
    arguments.

commit e1acd78d1e88fe51aad96badf32555c470ee029b 
Author: Martin Hopfeld <martin.hopfeld@sse-erfurt.de>
Date:   Mon May 23 08:03:13 2011 +0000

    geninfo: Make geninfo handle MinGW output on MSYS.
    
    This patch converts path mixtures from MinGW when running on MSYS to
    correct MSYS paths.
    
    In solve_relative_path() an additional conversion step will be inserted
    when running on MSYS. This will extract the drive letter and convert the
    remaining path from Windows pathnames to Unix Paths, which are used by
    MSYS.
    
    Additionally, if no drive letter is found, the (relative) path is
    converted to Unix style. There may be the case where Windows and Unix
    path separators are intermixed within one path string.

commit ed161e3db5cd5a7c6c8b2113930c729f001cdd4e 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Dec 16 08:11:22 2010 +0000

    genpng: handle empty source files
    
    Generating an overview PNG image for an empty source code file fails.
    Handle this case by assuming a single empty line when run for an empty
    source code file.
    
    Reported by: sylvestre@debian.org

commit 95e2c5c337d281b4e88144d95d29bbec183c8728 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Dec 7 08:40:09 2010 +0000

    genhtml: add note to further explain branch coverage output

commit b1c66916151dd4b20998c79f81edf174659ebb14 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Dec 7 08:29:45 2010 +0000

    genhtml: fixed incorrect description of default coverage rates

commit 1994be7d8ed472772b884063af74235f2f25ab39 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Nov 19 16:33:25 2010 +0000

    geninfo: add missing man page sections
    
    Add sections describing options --derive-func-data and --no-markers to
    the geninfo man page.

commit 01a393ef76092e43ebd2d8bf7892ebf375481a84 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Nov 19 16:15:27 2010 +0000

    geninfo: remove help text for unimplemented parameter
    
    Parameter --function-coverage was removed but the help text still
    mentions it. Fix this by removing the option from the help text as
    well.

commit b92f99d9db0af131080c462300dc9baf292a8ff6 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Nov 19 16:00:22 2010 +0000

    genhtml: handle special characters in file and directory names
    
    HTML special characters (e.g. '<') found in file or directory names are
    not correctly shown in HTML output. Fix this by correctly escaping such
    characters.

commit 17e158d4569d25218e79901e2d8cd03bfc7752fc 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Nov 19 15:45:01 2010 +0000

    gendesc/genhtml/geninfo/genpng/lcov: handle '<' in filenames
    
    Use 3-arg open mode to prevent that a special character (e.g. '<')
    found in a user-specified filename interfers with the required open
    mode for that file.

commit b87e40e475c560bdc88206df4de6dc8cf094d91f 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Nov 19 15:11:53 2010 +0000

    geninfo: ignore <built-in>.gcov files
    
    The gcov tool will sometimes create a file <built-in>.gcov for code
    which was added by gcc itself during compilation. Since there isn't
    any source available for such code, geninfo will fail. Fix this
    by skipping these files while capturing code coverage data.

commit 398d8f385423927b5675c1429f58c67b6a89a1a8 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Oct 28 14:17:57 2010 +0000

    geninfo: add function comment
    
    Add comment explaining data structures used by function derive_data.

commit f5c2072e0e7195d35455db50705884e7f6c5fbe5 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Oct 28 14:16:34 2010 +0000

    geninfo: apply exclusion marker to derived function data
    
    When option --derive-func-data is used together with exclusion markers,
    function data for excluded lines is still included. Fix this by
    only deriving function data for lines which are instrumented and not
    excluded.
    
    Reported by: bettse@gmail.com

commit 82280b8a5a78e8a147c333c8850a556729d9d96d 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Aug 31 08:19:03 2010 +0000

    geninfo: improve --debug output

commit 6375a03010cb1bb22490b9d19a176188940e2f8b 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Aug 31 08:17:23 2010 +0000

    gcov: add configuration file option to not use gcov's -a option
    
    lcov calls gcov while specifying its --all-blocks option to get more
    detailed branch coverage data per line. It turns out that this option
    is broken on many versions of gcov, resulting in an endless loop while
    processing some gcov data files. There's also a slight performance
    penalty when specifying -a.
    
    lcov users can opt to not use the -a option by setting configuration
    option geninfo_gcov_all_blocks to 0 in the lcovrc file.

commit 7706fb73ebef8060fbbd92c0e08b5d68a2cd284e 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Aug 24 16:15:53 2010 +0000

    lcov: add option to specify a configuration file
    
    Provide an option for users to specify a configuration file to lcov.
    This option may be useful when there is a need to run several instances
    of a tool with different configuration file options in parallel.

commit a404dafc2da12608a936afeb095d68410fa49b0a 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Aug 23 16:14:37 2010 +0000

    lcov: add option to display summary coverage information
    
    Provide an option for users to determine the summary coverage
    information of one or more tracefiles. Example output:
    
    Summary coverage rate:
      lines......: 26.0% (78132 of 300355 lines)
      functions..: 34.9% (8413 of 24081 functions)
      branches...: 16.9% (32610 of 193495 branches)

commit 526b5b6a43f2b29f11eb02c1dd8f645293d8c295 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Aug 23 14:47:43 2010 +0000

    lcov: add option to exclude external files
    
    Implement an option for users to specify that external source files
    should be excluded when capturing coverage data. External source files
    are files which are not located in the directories specified by the
    --directory and --base-directory options of lcov/geninfo.

commit c2255a0344648dc6eaef0189c53f345fdc70ed4e 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Aug 20 14:58:48 2010 +0000

    lcov: pass --no-recursion to geninfo
    
    When specifying --no-recursion, make sure that the option is also passed
    to the helper tool geninfo.

commit 83543f3d21b5a5496b57c8d73e8e9c1819f82f34 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Aug 20 14:31:59 2010 +0000

    genhtml: fix HTML page title for directory pages

commit b77df8ef1a69de3809e0b0bfa5cbbe5a84f313ae 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Aug 20 14:27:19 2010 +0000

    genhtml: make HTML charset specification customizable
    
    Provide a configuration file setting to adjust the charset specification
    used by all generated HTML pages. Also change the default charset to
    UTF-8.

commit 1ff260462a67c440dc709d34c1fadf7d64760120 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Aug 20 13:14:50 2010 +0000

    lcov: follow Perl naming guidelines

commit f637eb8c6ecb793b64eeb6bea57c6be8501d1484 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Aug 20 13:08:25 2010 +0000

    genhtml: add --ignore-errors option
    
    Provide a means for users to specify that genhtml should not abort if
    it cannot read a source code file. Also make handling of --ignore-errors
    parameter consistent accross lcov, geninfo and genhtml.

commit 617bced393d5bb97e3409ec140768d9c8a2e2bfb 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Aug 6 11:25:12 2010 +0000

    lcov: update CVS version to 1.10

commit 4dcb4f0ed014ca0f49859ef84fc9ced650f6deb8 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Aug 6 11:14:38 2010 +0000

    lcov: finalizing release 1.9

commit 594779e047eed2f534905ac40912969955d3797f 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Aug 5 16:17:44 2010 +0000

    lcov: update CHANGES file in preparation of new release

commit fbbd9034e7a4ea4bc59342b22bfbe9612dd4bdb8 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Aug 5 15:11:56 2010 +0000

    lcov: introduce configuration file parameters for list output
    
    Make some aspects of list output customizable via configuration
    file parameters. Also introduce special handling, if the root
    directory is chosen as prefix.

commit c6e783c1a1d3fb6db7419af95f9e2dcb89836fe9 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Aug 5 14:07:35 2010 +0000

    lcov: switch coverage rate and number columns in list view
    
    To be more consistent with the order of output in the "Overall
    coverage rate" case, rates are now shown first in the list output.

commit 3c87b66c68c2e06811c9be479c6813cb409e5461 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Aug 5 11:22:12 2010 +0000

    lcov: fix display of total line coverage rate in list view

commit 3cb6bc4ae0ef34aa63931d63f659f1ef43804c77 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Aug 4 16:15:19 2010 +0000

    lcov: more lcov --list improvement
    
    Further improve list output to increase readability.

commit dd98ff68ad143b985a728fc585c86d69e6027bd8 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jul 28 14:49:47 2010 +0000

    lcov: minor list improvement

commit d4778c75ce8cf3c9d44607b6fd0e385db71126dd 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jul 28 14:48:25 2010 +0000

    geninfo: remove unneeded functions

commit 65a15afef3430c49c9c7c0d151cc2afec5fc83cc 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jul 28 14:19:09 2010 +0000

    geninfo: print note on branch coverage data only once

commit bd8ab633298ec27acf5f7db4b2cc4766baf1f153 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jul 28 14:17:59 2010 +0000

    geninfo: remove incorrect overall coverage rate calculation
    
    geninfo output showing the overall coverage rate of its current
    operation is incorrect since it may count lines, functions and
    branches for included files multiple times. Remove the output
    and associated code until a fixed version is available.

commit 8c54de96a1326b7ee0632773816c52eda43393e8 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jul 28 13:56:26 2010 +0000

    lcov: more list output fixes

commit 7e5fa9900d991320677c381db747c764495b2cc2 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jul 28 13:52:01 2010 +0000

    lcov: fix list output
    
    Fix list output for directories with short filenames.

commit badd4790c70bd8ef8b991a9d56d0e062b28006a8 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Jul 26 13:33:18 2010 +0000

    lcov: fix problem when using --initial and --kernel-directory
    
    Fix a problem in lcov that resulted in --kernel-directory options
    being ignored when specifying --initial at the same time.
    
    Reported by hjia@redhat.com.

commit a06c2038babb2f6d3e0a634cd298b0434041f834 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Jul 19 16:06:15 2010 +0000

    genhtml: change wording for branches which were not executed
    
    Since gcov sometimes reports both branches which were never executed
    as well as branches which were executed in a single block, the wording
    of the HTML alt text needs to be adjusted accordingly.

commit e6b2491823ffd84c85406145031646af675170ee 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Jul 19 15:50:02 2010 +0000

    geninfo: handle branches in unnamed blocks
    
    gcov will sometimes report branches outside of a block. In that case,
    account these branches to a special block so that they are not
    accidentally merged with subsequently reported blocks.

commit d6c82edf2117ce8b6232c998baf06c7a87269081 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Jul 19 15:23:10 2010 +0000

    genhtml: fix branch formatting code
    
    Fix the vertical alignment of the HTML representation of branches in
    the source code view.

commit 44ac74a47e25064ad1b421f65a28d057fdb9925d 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Jul 19 14:27:08 2010 +0000

    lcov: improve list output
    
    Improve list output by separating directory and file names. Also provide
    an option to show full path names.

commit 0ab6f7507f3c4f074bec41e571ff1afbeb943185 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Jul 19 12:12:43 2010 +0000

    genhtml: fix large numbers being shown as negative in html output
    
    genhtml uses a "%d" format string for printing execution counts. For
    counts exceeding integer range, the output becomes negative. Fix this
    by using the "%.0f" format string instead.
    
    Reported by kkyriako@yahoo.com.

commit bbf0ef40a51dd716c544f91576cffde7986bb6ec 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Jun 7 12:22:18 2010 +0000

    geninfo: ensure that exclusion markers apply to --initial
    
    Fix a problem where exclusion markers are ignored when gathering
    initial coverage data.
    
    Problem was reported by ahmed_osman@mentor.com.

commit b371fc59fa52f7176f62f382457fba498f39f4b2 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Jun 1 13:48:29 2010 +0000

    lcov: fix problem with relative path names
    
    Fix a problem where coverage data is missing because gcov produces
    output files starting with a dot.
    
    Problem reported by weston_schmidt@open-roadster.com.

commit 93c70ddd0edbc2b0addf9d135dfd76871cc7a160 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Sun Feb 28 20:57:37 2010 +0000

    lcov: fix problem with relative paths in build paths
    
    When binaries are built using relative paths, lcov cannot find any
    coverage data. Instead, warnings similar to the following are printed:
    
    geninfo: WARNING: cannot find an entry for ^#src#test.c.gcov in .gcno
    file, skipping file!
    
    The reason for this is that File::Spec::rel2abs does not remove ../ from
    paths which results in lcov not being able to match the relative and
    absolute versions of the corresponding filenames. Fix this by using the
    internal function solve_relative_path instead.

commit fad24a75cc69364d002d40e4fb75736b0efbdb37 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Sun Feb 21 14:57:52 2010 +0000

    geninfo: write all debugging output to STDERR

commit c0943385fa0acb927f63f9f78c9aeaebe3a8ece1 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Sun Feb 21 14:56:46 2010 +0000

    geninfo: fix problem with some .gcno files
    
    Some .gcno files contain more data in a line record than
    expected. Skip unhandled bytes of a .gcno file record.
    This prevents the following unexpected error message:
    
    geninfo: ERROR: file.gcno: reached unexpected end of file

commit 4b9ee7598e991b503425148eb43a35de2702aded 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Sun Feb 7 13:07:09 2010 +0000

    lcov: add COPYING file

commit de0e43a098ade45d6624ea43a53e6fad9a176469 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 29 11:07:25 2010 +0000

    lcov: update CVS version to 1.9

commit 4a33269fa3a73ea2577f7616d90bd3f1d14ae460 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 29 10:09:53 2010 +0000

    lcov: finalizing release 1.8

commit 310ffb28d8847f96e02b5a5db3d16bdcb406a876 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 29 10:01:35 2010 +0000

    lcov: updated CHANGES file

commit 9e12808e6108e05dca42b5e682bd8be121f3608d 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 29 09:21:22 2010 +0000

    genhtml: use sans-serif font for function table

commit 71baabb6a1c15228213f8b25359346ee202300ce 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 29 09:12:55 2010 +0000

    lcov: improve list output

commit cc61a28dbc3c46ac84340141fafbfa559e1bf318 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 29 08:56:19 2010 +0000

    lcov: fix overall rate display for tracefiles with more than one testcase

commit b89028529db5110b3b76d117df788768a593d7dd 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 29 08:44:47 2010 +0000

    lcov/genhtml: fix warning while merging branch data

commit b7c69f31d9b1bfbd4bfc0fcb880cb8e514bcdb3f 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Jan 28 15:59:23 2010 +0000

    lcov: fix branch coverage related issues
    
    - warnings when combining certain combinations of branch data
    - branches are not merged correctly when multiple input files are specified
      to genhtml or when lcov -a is used

commit 817875459df122fa3536a5e57c05ddfae19a089e 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jan 27 16:37:50 2010 +0000

    gendesc: fix problem with single word descriptions

commit 33f60f48747b5ba12a6fdfb505bb662c922496bd 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jan 27 12:10:04 2010 +0000

    lcov: remove temporary files when creating a package

commit 6775457cbd3fa86acba4655d77b4ba2054b13253 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jan 27 12:00:05 2010 +0000

    lcov: correctly retain information about converted test data

commit f4d13eccc54f31a53ad109c3c4b86e4b52d6dfcb 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jan 27 10:17:43 2010 +0000

    lcov. fixed overview output for function data

commit aa00c65b7514c93320c1c787b848c8277593dcb0 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Jan 26 09:36:19 2010 +0000

    genhtml: don't use too much gcc-specific terms (basic block -> block)

commit 3562f60b9500d8ad167c4629e9d95485308aa665 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 22 16:17:37 2010 +0000

    lcov: consolidate coverage rate classification limits
    
    Classifying coverage rates per coverage type (line, function or branch
    coverage) is not useful in most cases. Also the respective
    color legend takes up too much space in the HTML output. Remove
    function and branch coverage rates from the documentation and from
    the color legend. Instead the original limits will be applied to those
    coverage types as well. The per type rates can still be used if required
    but it is recommended to only use one rate set.

commit d77dc6a0adf259e322ac9f35c93241d446269a5b 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 22 16:16:47 2010 +0000

    lcov: minor code cleanup
    
    - remove unused function definitions and declarations
    - remove unused CSS declarations
    - add missing function declarations
    - fix function prototypes

commit b3243d1fdc17571ca9b1ed6a1ea975a9b3f1b86b 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 22 16:16:15 2010 +0000

    geninfo: consolidate similar functions

commit 739e2bca054c69975594c2570049e8aa9ae1b5ce 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 22 16:15:35 2010 +0000

    lcov: add coverage result output to more operations

commit 0a31d3c0696015c5e4878e821529eba45451c3dd 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 22 16:14:57 2010 +0000

    lcov: minor cosmetic HTML changes
    
    - top level view is now named "top-level"
    - use sans-serif font for coverage values in file list
    - use smaller font for show/hide details link
    - use smaller font for function/source view link
    - use smaller font for show descriptions link

commit b631fa0cb9aabdf18f9365423f0b0bf85d6b8e16 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 22 16:14:27 2010 +0000

    lcov: improve color legend
    
    Move color legend closer to the table containing coverage rates.

commit 2aeeeafb31c36ccd1a51051f040e29a9fcf59df2 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 22 16:13:58 2010 +0000

    lcov: implement branch coverage

commit 49dfe22f41b6c3edcb774dfb89b1a807ce7aee6c 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 22 16:13:34 2010 +0000

    genhtml: implement branch coverage

commit 6aa2422401bb854c9710f5ed2936f06e487848c5 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 22 16:13:07 2010 +0000

    geninfo: implement branch coverage

commit ca2c9781b0a512bd6789eac2b6840405e2d87330 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 22 16:12:27 2010 +0000

    geninfo: consolidate handling of extra gcov parameters

commit 9d9c964eb6ece00b15ef068f176c68cb0eedfda0 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Jan 21 11:26:34 2010 +0000

    lcov: minor fix for lcov --diff

commit 4306f81d1e8446a89fe83d20cd71abe075a3cd61 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Jan 21 10:23:35 2010 +0000

    lcov: improve lcov --list output

commit 3242ce1bae94cfd859c3bc964fab11f85bd7d1ed 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jan 20 17:13:28 2010 +0000

    lcov: unify data order in tracefiles

commit 8f53b2e8dbbe5580050fbe0c604bd9a9322735a7 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jan 20 16:05:56 2010 +0000

    lcov: fix bug when applying baseline files without function coverage data
    
    Fix the following error that occurs when genthml's --baseline-file option
    is used on files which do not contain any function data:
    
    genhtml: Can't use an undefined value as a HASH reference at ./lcov/bin/genhtml line 4441.

commit 96fcd676d5ac9c1eb9f83f3dc4c3089ba478baad 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jan 20 15:28:21 2010 +0000

    lcov: resolve short-name option ambiguities

commit f1d34d49b394a13c33c7a5b51f04e5dfbded5d26 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jan 20 14:47:50 2010 +0000

    lcov: fix error messages

commit 89ff61aa7cd2ca23b8cacd649288ecf7f67746de 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jan 20 08:35:20 2010 +0000

    lcov: fix bug when using genhtml's --baseline-file option
    
    Fix the following error message when trying to use genhtml's
    --baseline-file option:
    
    genhtml: Undefined subroutine &main::add_fnccounts called at
    /home/oberpar/bin/genhtml line 4560.
    
    Reported by Brian DeGeeter <sixarm@gmail.com>

commit c3df3a8504b06ca32b9863fdb2abb8cf0ce62251 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Jan 18 09:17:17 2010 +0000

    lcov: ensure LANG=C before calling gcov
    
    Fix problem calling lcov when LANG is not set to an english locale.
    Reported by benoit_belbezet@yahoo.fr.

commit d945f23345e02ca535d740782e7ae10cb3396b8c 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Nov 18 09:39:21 2009 +0000

    lcov: more version fixup

commit 413249e6336cff432083954e6ed47236dd35f647 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Nov 18 09:38:03 2009 +0000

    lcov: fix version fixup

commit d0b7148e2d76164e5ea091fe56035c24f7dce22a 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Nov 18 09:34:45 2009 +0000

    lcov: add more CVS versioning

commit 4e0219f918a15cbc9ff40d0e0e4dab91ac073f72 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Nov 18 09:14:56 2009 +0000

    lcov: add CVS revision number to version output

commit 34154c2d48497d9aad41ec1452ba94dd4cbce881 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Oct 30 14:18:45 2009 +0000

    lcov: further clarification in the README

commit 7a4ab1340dd7f88ba0fb56a7b0eb368bf2d0112e 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Oct 30 13:58:56 2009 +0000

    lcov: update README to mention required -lgcov switch during linking

commit 3fa5b311b123af84debbd774baa4a1cd30e7085b 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Oct 27 16:54:41 2009 +0000

    lcov: remove further unneeded warning
    
    ... + use correct source for list of filenames

commit cd4051719e72129f4abf1ad177269bf14031f83a 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Oct 27 16:19:05 2009 +0000

    lcov: fix problem with matching filename
    
    - used correct source for filenames
    - converted match_filenames to portable version

commit 0d0ff8a9945260eebed6d316aa08c0021faf3549 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Oct 27 15:29:41 2009 +0000

    lcov: remove unnecessary warning

commit 6c711d664c38d18f788ee8a5239586cd4a5b77d9 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Oct 26 14:21:40 2009 +0000

    lcov: improve derive-func-data option
    
    - rewrite graph file handling
    - make derive data look at all lines belonging to a function to find
      out whether it has been hit or not
    - introduce --debug option to better debug problems with graph files

commit 214cda20c4b591a823045f35b73f2a16221c9aa1 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Oct 1 15:26:58 2009 +0000

    lcov: introduce new options --derive-func-data
    
    When using a gcov version that does not provide function data,
    this option will attempt to guess the function coverage data
    for a function by looking at the number of times that the first
    line of that function was called.

commit 9a75125895fd07a775a2a25f2cbe66b9fbf332d6 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Oct 1 11:49:53 2009 +0000

    lcov: ignore incomplete function names in .bb files
    
    - don't abort processing when an incomplete function name is
      encountered in a .bb file (gcc 2.95.3 adds those)
    - fix filename prefix detection

commit d5ab6076a0bfc5ad80652ba592583f7fc7946dc6 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Sep 28 12:27:09 2009 +0000

    lcov: improve detection of gcov-kernel support

commit 3cca782fcac9c4ea54adcebe75e1f047a8dca636 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Sep 22 13:44:04 2009 +0000

    lcov: fix problem with CONFIG_MODVERSIONS
    
    Make geninfo work with Linux 2.6.31 and CONFIG_MODVERSIONS.

commit 8af873f44c104cd214b796e13b916718fc8f6f99 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Sep 16 15:24:51 2009 +0000

    lcov: remove default for gcov_dir so that auto-sensing works
    
    Fix problem with lcov not finding kernel coverage data at
    /sys/kernel/debug/gcov because the default system-wide
    lcovrc file contained a specification for the gcov directory
    which prevented auto-detection from working.

commit 50f90681af4d105a52b5b0dbf4f0bfd04369ffd2 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Aug 27 10:14:23 2009 +0000

    lcov: apply excluded lines also to function coverage data

commit 4aeb840d25c85a419171970e1a445aeb81079e53 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Aug 27 09:23:13 2009 +0000

    lcov: fix help text typo

commit c17a783f87aa8e42949131d2fbc1c540bb3751a3 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Aug 27 09:22:43 2009 +0000

    lcov: add exclusion markers
    
    Users can exclude lines of code from coverage reports by adding keywords
    to the source code.

commit 445715c88337c13ce496bd05423ee5e58d84705c 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Aug 14 08:19:26 2009 +0000

    lcov: ignore gcov errors for unnamed source files
    
    When specifying "--ignore-errors gcov", lcov/geninfo should not abort when
    they cannot read a .gcov file. Fix this by introducing warnings in the
    respective places.

commit 0e23f03a9ce130e8ebec679fb5a9a6f854efbee5 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Aug 6 12:34:04 2009 +0000

    lcov: improvements
    
    - added --from-package and --to-package options
    - improved gcov-kernel handling

commit 17a05bdf646870cd61794274c7165211c93c82f9 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Jul 23 12:45:15 2009 +0000

    lcov: fix kernel capture for new gcov-kernel version
    
    - fix problems when compiling without O=

commit 64e302b9134b6098852cad2e6180e0722f2dea41 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Jul 21 15:42:44 2009 +0000

    lcov: improve lcov -l output

commit cea6941ef36d0860330b6e94f8c6096dca78ca58 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Jul 21 09:10:49 2009 +0000

    lcov: add support for the linux-2.6.31 upstream gcov kernel support

commit 04470d2b25808f195d338112155b9f7db405d902 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Apr 22 09:13:12 2009 +0000

    genhtml: fix warning about undefined value used
    
    nikita@zhuk.fi:
    genhtml.patch checks that $funcdata->{$func} is defined before using
    it - I got few "undefined value used" warnings without this check.

commit a12d4f9a5d36232b928be12b7cbfaa9a00b3a923 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Apr 22 09:08:19 2009 +0000

    genpng: fix runtime-warning
    
    - when called from within genhtml, genpng would warn about warn_handler
      being redefined

commit d0b5641c62bbdac89757b9ff185a7aa3f38fc0bb 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Mar 13 09:58:00 2009 +0000

    lcov: improve function name filtering
    
    Only remove those characters from function names which would conflict
    with internal delimiters.

commit fbafa4a5628a639544e83f88083082c685677c36 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Feb 13 15:04:40 2009 +0000

    genhtml: minor man page update

commit 085a2150e38a3c1bdadb5af23c0a8a8a79dc4b0d 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Feb 13 14:56:45 2009 +0000

    genhtml: added --demangle-cpp option
    
    - used to convert C++ internal function names to human readable format
    - based on a patch by slava.semushin@gmail.com

commit 53f3ed4afb45a2a4248314b677d36377598cc73c 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Feb 13 14:07:46 2009 +0000

    genhtml: update comment

commit 3c2b2e8541387506fd514d183f9a4a63c07c0aa4 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Feb 12 17:01:19 2009 +0000

    genhtml: fix error when combining tracefiles without function data
    
    - genhtml: Can't use an undefined value as a HASH reference at genhtml
      line 1506.
    - bug reported by richard.corden@gmail.com

commit 22397370ada6893b6e9a1c3f6ad0aba7f4864f81 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Feb 11 09:31:24 2009 +0000

    lcov: fix error when combining tracefiles without function data
    
    - lcov: Can't use an undefined value as a HASH reference at lcov line
      1341.
    - bug reported by richard.corden@gmail.com

commit 24ec53ae83acdd35682ba757adae23750bd4c623 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Feb 9 16:15:49 2009 +0000

    lcov: fix warning when $HOME is not set
    
    - based on patch by acalando@free.fr

commit 5da3521d5a438db0a21e93b0d14ea5a3cdab14d9 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Feb 9 12:41:44 2009 +0000

    lcov: use install -pD -m <mode> for file installation

commit bdce1bda2ac1a86aa6dfefae8e18353ba57afe4b 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Feb 9 09:46:00 2009 +0000

    lcov: fix double-counting of function data

commit ea62c4e701abb05dd560ef22b52a4a72c17660e8 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jan 21 16:33:29 2009 +0000

    geninfo: need to add CR removal to geninfo as well
    
    ... or checksumming will fail

commit 70be5df7d58a393e27cee178df669c12ec670c5a 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jan 21 16:24:01 2009 +0000

    lcov: modify end-of-line CR removal
    
    - s///g is 10% slower than s/// - \r may be 0x10 or 0x13 (see man
      perlport)

commit d8df4b0f83ff175f1a06afb693903ee1a93ec377 
Author: Michael Knigge <michael.knigge@set-software.de>
Date:   Tue Jan 20 11:41:39 2009 +0000

    lcov: remove CRLF line breaks in source code when generating html output
    
    - added patch by michael.knigge@set-software.de

commit 442cca7e69356e7f8ba03bd95f7813576bd197cc 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Nov 17 14:11:20 2008 +0000

    lcov: updated CVS version to 1.8

commit 5c5c85a1c090360facd50cb089b8af98f0b37c47 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Nov 17 13:55:52 2008 +0000

    lcov: version + date updates

commit 9f6a735809c23559b861e97a20af55a66b6b96bb 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Nov 17 13:49:43 2008 +0000

    lcov: fix spec file bug

commit 11483dc0b56d326718edcd31d06458143add858f 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Nov 17 13:44:38 2008 +0000

    lcov: update error and warning messages

commit 4dd11b80d14e34fee2e75b3fe8c7aa163f61ad1d 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Nov 17 12:48:03 2008 +0000

    lcov: preparations for release 1.7

commit b847ed6f3103a4c9f0a48417b9c3f160b9e00557 
Author: Jeff Connelly <jeffconnelly@users.sourceforge.net>
Date:   Fri Oct 10 07:54:47 2008 +0000

    lcov: geninfo chokes on spaces in the directory name
    
    In lcov 1.6, geninfo fails to find gcno/gcda files if the source directory
    has spaces in the name, because it uses backticks to shell out to "find",
    passing $directory on the command-line.
    
    Attached is a patch that double-quotes the variable, allowing geninfo to
    operate on directories with spaces in their name. The fix isn't perfect; it
    won't work on directories with a " character, but it works fine for my
    purposes (I don't have any directories with quotes). A better fix would be
    to use IPC::System::Simple's capturex from
    http://search.cpan.org/~pjf/IPC-System-Simple-0.15/lib/IPC/System/Simple.pm
    #runx(),_systemx()_and_capturex(). capturex() is a multiple-argument form
    of the backticks, so it avoids any interpolation errors.

commit ee3cdd554ee4e6d3ef5bdc9c5dcfee50de6375a7 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Aug 18 07:12:33 2008 +0000

    lcov: change sorting order to low-to-high coverage

commit fe665ca5ccf9d73d9ebdae17de88e181c1b9b0eb 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Aug 15 08:38:21 2008 +0000

    lcov: several changes
    
    - update download link
    - unify webpage links
    - provide --sort and --function-coverage switch + documentation

commit 14137c5456f307982fed418e1e8fac65d7f086c3 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Aug 13 15:57:23 2008 +0000

    lcov: fix function view page creation when --no-func is specified

commit e59f7d15ffc7f1b3794a4212c53d0fb97ac7fb2a 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Aug 13 15:35:48 2008 +0000

    lcov: updated versioning mechanism
    
    ... + fixed some man page bugs

commit e933698b31bc2fb4a750d89a5755bb8155313da2 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Aug 13 14:08:23 2008 +0000

    lcov: updated rpm description
    
    ... + summary and version strings

commit 5a9660585ce39a77fa38607d0c2d2440955e7242 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Aug 13 13:53:50 2008 +0000

    lcov: integrated function coverage patch
    
    ... by Tom Zoernen + sorting function

commit d10ede8179747cfd675a3989578350c710e9bdd5 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed May 7 15:08:12 2008 +0000

    lcov: --norecursion becomes --no-recursion
    
    + added docs

commit 4096130608b9faf74c5b5feac554a10b5d9f83ce 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Feb 21 10:20:33 2008 +0000

    lcov: fix error when trying to use genhtml -b
    
    genhtml fails when the data file contains an entry which is not
    found in the base file.

commit 9578099e13388344a6179c7cce54bfa094fd9b08 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Feb 20 17:21:51 2008 +0000

    lcov: fixed problem with pre gcc-3.3 versions
    
    read_gcov_headers does not return valid results for pre gcc-3.3 versions.
    Due to an unnecessary check, parsing of gcov files was aborted. Fix
    by removing check.

commit 16ec76b48fbc50c32890919e5bd0c30653719af9 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Feb 5 09:18:50 2008 +0000

    lcov: adding support for gzipped html
    
    ... based on patch by dnozay@vmware.com
    
    dnozay@vmware.com: genhtml is a great tool to generate html, but the more
    files, the more space it takes (here I have over 113MB of html generated),
    add to that I need to have different sets, and space usage increases
    dramatically (2.7GB). we are using browsers with htmlz support, so it would
    be nice to have support for that in genhtml, relying on 'gzip -S z' to do
    the job.

commit f2c98a8c8581180533508eb4af41720d8566049e 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Jan 7 16:33:57 2008 +0000

    Filter non-word characters in function name
    
    ... as they would break our file format which uses comma and '=' as
    field separator.

commit 37725fc78fcacaf06e6240971edc3bdd7fe3d142 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Nov 1 16:29:39 2007 +0000

    lcov: fix for problem resulting in lcov aborting with "ERROR: reading string"

commit 48f13fcec1b521d2daba6202ccd7ec0ec8c5ece9 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Oct 4 08:18:07 2007 +0000

    lcov: workaround for gcc 4.1.0 .gcno file oddness
    
    scott.heavner@philips.com:
    I'm trying to use lcov 1.6 with gcov/gcc 4.1.0. The geninfo parser was
    aborting on a small number of .gcno files. I've patched my local copy so
    that geninfo prints out the offset of the error and skips the remainder of
    the problem file

commit 1a805ea068db29b63a83c801f3bb1840fda8dd35 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Aug 24 08:50:26 2007 +0000

    lcov: add experimental option "--norecursion"

commit 194de5071db1d9903d22164432448b73c1ec6cd0 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Aug 23 11:08:39 2007 +0000

    lcov: Makefile for post-release

commit 0750f8a3e5235833711d616a3763c04103cf55a5 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Aug 23 11:04:30 2007 +0000

    lcov: Makefile for release 1.6

commit cb911f7a79593c89a730dc93fa54179fbf1df363 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Aug 20 10:29:35 2007 +0000

    lcov: fixed spec file

commit 62cefebdda87784140eb5f997ae4e575d2338298 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jul 6 07:38:47 2007 +0000

    lcov: add new option --initial to get zero coverage data from graph files

commit f0b6927f1ab1052b00081c662ced614a6e5f9ed7 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jul 4 14:38:59 2007 +0000

    lcov: fixed bug that would not delete .gcda files when using -z

commit 13941c3a159caf7dc6ba18a5b13e43c20fc18f2b 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jul 4 14:18:26 2007 +0000

    lcov: another update in preparation for a new release

commit d25e630a77ef2d0f69139058322269387866e414 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jul 4 13:13:22 2007 +0000

    lcov: man page update

commit 7844b915af5402441df9ab0423e4c20ef9a2632f 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Jul 3 16:43:05 2007 +0000

    lcov: update manpage

commit 5adaa72bfb32737d18c328492777c1c6116d4a9e 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Jul 2 15:29:02 2007 +0000

    lcov: preparations for new release
    
    - updated CHANGES file
    - added compat-libtool + no-compat-libtool option
    - changed libtool default to on (due to popular request)
    - added checksum option
    - changed checksum default to off (to reduce cpu time + file size)
    - added geninfo_checksum option to lcovrc, deprecated
      geninfo_no_checksum
    - added geninfo_compat_libtool option to lcovrc
    - minor update of README file

commit 6cbfd5022703a6198e1a1e2a2ddddcc0b90f5334 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue May 22 08:11:44 2007 +0000

    lcov: minor help text update

commit 2416ed02ba299c4d0bceb1e47c214b7dec066d7a 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Mar 7 14:59:25 2007 +0000

    lcov
    
    - add --ignore-errors option to lcov/geninfo
    - add --gcov-tool option to lcov/geninfo
    - remove s390 test case modification in geninfo
    - restructured help text for lcov/geninfo

commit a13375811717d3ada718e6f52364e4344a7e3187 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Jan 8 17:07:21 2007 +0000

    lcov
    
    - re-added libtool compatibility workaround patch by
      thomas@apestaart.org
    - added new lcov/geninfo-option --compat_libtool to activate libtool
      compatibility patch

commit 14871d7b097282819db60266d8b8a38506d7b14a 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Nov 14 11:45:17 2006 +0000

    lcov
    
    Fix for problem found by Joerg Hohwieler: lcov -k doesn't work if -k is
    specified more than once.

commit 43b52b37006822c0fca12548bc72fecc957342ca 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Jun 26 15:48:52 2006 +0000

    lcov: new version for prerelease rpms

commit 89e9d59709c9d9d8722170c86251090adc3b96c9 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jun 7 09:31:57 2006 +0000

    lcov: removed autoupdate of copyright date (second thoughts)

commit bb0cf1c9d0ed58b37c1551fea765fb1622bcacde 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jun 7 09:20:37 2006 +0000

    lcov: minor cleanup (release preparations)

commit 527693d753d11ac2b59fe26b923662c99e6e3715 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Apr 5 10:10:05 2006 +0000

    lcov
    
    - added base-directory documentation
    - updated CHANGES file

commit 11ef9338cc4124801c8b61e3edd51a02e50b4c68 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Mar 20 17:09:50 2006 +0000

    genhtml: added html-extension option

commit 93d22308ffb410327248059b7dcdb592f85e249e 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Mar 20 16:39:25 2006 +0000

    genhtml
    
    - adding html-prolog and html-epilog options (based on patch by Marcus
      Boerger)
    - specified behavior when both --no-prefix and --prefix options where
      provided
    - small whitespace diff

commit dcac095cdc00cc65930285bb6fc01d0f257ee4ed 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Feb 15 16:02:07 2006 +0000

    lcov: added check for invalid characters in test names

commit d89e561dfd9c5fde43350af1b145b1892d0710d0 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Dec 2 06:38:16 2005 +0000

    lcov
    
    - updated Makefile so that people building RPMs from the CVS version get
      a correct build version. Note: this needs to be adjusted after each
      release!

commit 1960123050f9098690768d10cd2490dd49b995f7 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Thu Nov 10 13:10:09 2005 +0000

    lcov
    
    - fixed bug: .info file generation with new gcc 4.x compilers may fail
      for programming languages that allow ':' in function names (c++,
      objective c)
    - removed special handling for libtool .libs files
    - libtool should work with currently undocumented option --base-directory

commit 479d446d3bf20a84c2933100ead279c79eeaf5c4 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Sep 7 16:24:39 2005 +0000

    lcov
    
    - implementation of new option --base-directory (untested, undocumented)
    - minor fix for link-traversal when looking for object directory
    
    TODO: document option (man page, online help), add to config file, check
    whether libtool fix still works

commit 770b94a3172f206de7f194c7497ebae14348b521 
Author: Robert Williamson <robbiew@users.sourceforge.net>
Date:   Mon Jul 11 17:54:25 2005 +0000

    Applied patch from Stefan Kost
    
    when running lcov over an uninstalled user-space apps tests, it finds
    the .da file in the .libs directories, but does not look for the sources
    one hierarchy up. Libtool places the object in the .libs dirs. when
    running gcov manually one can specify -o.libs/ to produce a source.c.gov
    file. I now have attached a patch that fixes the problem for me. please
    do not just ignore this report. the lcov tool is so nice and it would be
    a shame if it can not be used for normal apps.

commit 79f2ff2c168150e7532046c2cdbc1e42c8b4708f 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Jun 14 11:34:59 2005 +0000

    lcov
    
    - renamed support for modified compilers (gcc 3.3 hammer patch)
    - fixed bugs in the support for modified compilers

commit fb7dab3494fdd8b093e6a84f088f6ea07fcefe6e 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Mar 15 18:02:54 2005 +0000

    lcov
    
    Emil.Jansson@oss.teleca.se:
    lcov 1.4 does not work with the gcc version in Mandrake Linux 10.0
    
    >> gcc --version
    
    gcc (GCC) 3.3.2 (Mandrake Linux 10.0 3.3.2-6mdk)
    
    This patch for geninfo fixes the problem:

commit ae3fe899d824e8af8a16736a0c8104c903565a56 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Mar 8 14:23:06 2005 +0000

    lcov
    
    - added optional legend to HTML output
    - changed background color for "good coverage" entries to green for
      consistency reasons

commit 18b73d39fd9d6bc8829395baa612a6ed98b89efe 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Mar 2 14:49:47 2005 +0000

    lcov
    
    - fixed rpm build process to exclude unnecessary directories in RPM

commit ef6ee74df5bf1d1d104322f8fff36b5c6fda34b4 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Mar 2 12:48:29 2005 +0000

    lcov
    
    - added man page for configuration file lcovrc

commit be3afe2626d6bc72256e1873d409c737ac4391c9 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Feb 28 16:31:51 2005 +0000

    lcov
    
    - Updated CHANGES file in preparation for a new release

commit dc68ce9c804ef21bc8e149d9b468e18c1619bb54 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Nov 2 15:48:45 2004 +0000

    lcov
    
    - temporary fix for a problem which occurs when trying to parse C++
      coverage data generated with vanilla gcc 3.3.3

commit efedc5b930ab6743ea9f47ce4ea4a1a75bd739ff 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Sep 27 13:13:51 2004 +0000

    lcov
    
    - fix for minor bug in geninfo (access to uninitialized variable)
      related to SLES9 compatibility test and test for existing source code
      files

commit 47943eedfbec7a12c52e7a8ccbcfaf8d0706f142 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Sep 20 14:11:16 2004 +0000

    lcov
    
    - minor fix for regular expression used to parse .gcov files - caused
      problems when parsing branch coverage data and when using custom
      gcov versions

commit ce6335ebd92ce017b75ee3e194e9e3ca7bc7e1f3 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Sep 14 15:52:38 2004 +0000

    lcov
    
    - fixed bug in geninfo which would not report any FN: data for data
      generated with gcc versions 3.4.0 and above

commit 58df8af3a62fa4e60569ef300e0ddd0073bf109e 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Aug 31 15:57:41 2004 +0000

    lcov
    
    - added support for modified GCC version provided by SUSE SLES9

commit 69f3bc3a0c59b35eb6882205286a68b04a8a8d22 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Aug 31 15:48:32 2004 +0000

    lcov
    
    - fixed bug in lcov RPM spec file which would not include the global
      config file in the package list

commit 5d10ca22144ad2be885405c3683b20c0976f7562 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Aug 9 14:32:23 2004 +0000

    lcov
    
    - fixed a bug which would cause generation of incorrect line checksums
      when source code is not available while capturing coverage data
    - changed default directory for temporary files from . to /tmp

commit 8ee3061f23f17a5074deda0777c66c3e82b5d852 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Aug 9 11:15:02 2004 +0000

    lcov
    
    - added configuration file support
    - fixed Makefile error for target "uninstall"

commit 58af07f0b0ca1af8c9f2b90ad1683447bb560165 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Aug 6 11:36:33 2004 +0000

    lcov
    
    - fixed bug which would cause an error when lcov was used on a source
      directory which contained perl regular expression special characters
    - simplified regular expression character escaping
    - removed unnecessary function escape_shell from lcov

commit 69a6918d4cd386aff2fbff093a6e0b5ddcc46602 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Mar 30 13:27:55 2004 +0000

    lcov: - added --path option to fix --diff functionality

commit cbc6cb11b532e525ae8b0c0742a4fd41189ca7c2 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Mar 29 12:56:08 2004 +0000

    lcov
    
    - Added compatibility for gcc-3.4
    - Modified --diff function to better cope with ambiguous entries in
      patch files
    - Modified --capture option to use modprobe before insmod (needed for
      2.6)

commit 1cf9a02c3ea0e98cc1d8b626eaa0a2a1cbd96cf1 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Jan 30 09:42:13 2004 +0000

    lcov
    
    - updated CHANGES file
    - changed Makefile install path (/usr/local/bin -> /usr/bin)

commit c60f0668059032cf4dc5f6c556fd6117925f535f 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Jan 14 10:14:10 2004 +0000

    lcov-patch by Laurent Deniel
    
    avoids aborting the geninfo processing when an empty .bb file is
    encountered (e.g. source code with no profiled statement)

commit 7f2966f8f874a6c905b4d31e5aaf0f4654929044 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Dec 19 16:22:52 2003 +0000

    lcov: updated references to lcov webpage to reflect recent site changes

commit a3893f4eb2b4fadc4d7350324d74fa453a5ba0f3 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Dec 19 12:50:28 2003 +0000

    Added changes by Laurent Deniel
    
    - a small patch to lcov 1.1 that introduces the --follow option (in
      lcov & geninfo) to control whether or not links should be followed
      while searching for .da files.
    - a workaround for a gcov (3.2) bug which aborts with empty .da files
      (gcov 3.3 is fixed but many distributions include gcc 3.2)

commit d44f2f8e8672e31cc104c0598b0556a5949dc067 
Author: Paul Larson <plars@users.sourceforge.net>
Date:   Fri Nov 21 19:34:59 2003 +0000

    Fixed two buglets that caused geninfo to break with some versions of gcov.
    
    1. Return value for gcov --help might not be 0, expect -1 when it
       doesn't exist
    2. use -b instead of expanded (--branch-coverage or whatever it was)

commit 5a1a33a840a665c77409f799be91cc2dce5cd3b2 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Tue Nov 18 14:06:47 2003 +0000

    lcov
    
    - fixed function which interprets branch possibility data in geninfo
      (branch x taken = y% would not be interpreted correctly)
    - deactivated function which would add 'uname -a' output to testname
      in geninfo (output in genhtml/showdetails looked unreadable, there
      needs to be some better solution)

commit e0ea03fedf43a3232c35708f882d7058998b2b3d 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Oct 10 14:18:32 2003 +0000

    New function and bug fix update.
    
    Makefile:
    - Added rule to build source rpm
    
    lcov.spec:
    - Modified to support building source rpms
    
    genhtml:
    - Fixed bug which would not correctly associate data sets with an empty
      test name (only necessary when using --show-details in genhtml)
    - Added checksumming mechanism: each tracefile now contains a checksum for
      each instrumented line to detect incompatible data
    - Implemented new command line option '--nochecksum' to suppress generation
      of checksums
    - Implemented new command line option '--highlight' which highlights lines of
      code which were only covered in converted tracefiles (see '--diff' option of
      lcov)
    
    geninfo:
    - Added checksumming mechanism: each tracefile now contains a checksum for
      each instrumented line to detect incompatible data
    - Implemented new command line option '--nochecksum' to suppress generation
      of checksums
    - Added function to collect branch coverage data
    
    lcov:
    - Fixed bug which would not correctly associate data sets with an empty
      test name (only necessary when using --show-details in genhtml)
    - Cleaned up internal command line option check
    - Added info() output when reading tracefiles
    - Added checksumming mechanism: each tracefile now contains a checksum for
      each instrumented line to detect incompatible data
    - Implemented new command line option '--nochecksum' to suppress generation
      of checksums
    - Implemented new command line option '--diff' which allows converting
      coverage data from an older source code version by using a diff file
      to map line numbers
    
    genpng:
    - Added support for the highlighting option of genhtml
    - Corrected tab to spaces conversion

commit c17af02b4a856d8733a763e6c0685c31f3c7fb74 
Author: Nigel Hinds <nhinds@users.sourceforge.net>
Date:   Fri Sep 19 21:51:06 2003 +0000

    capture branch coverage data from GCOV.

commit e2fc88f85254017bcf1fb04a3c935395a9b7a4a1 
Author: James M Kenefick Jr <parseexception@users.sourceforge.net>
Date:   Thu Sep 4 16:56:10 2003 +0000

    Initial checking of the galaxy map

commit dfec606f3b30e1ac0f4114cfb98b29f91e9edb21 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Sat Jul 5 13:48:45 2003 +0000

    LCOV: Fixed negative count handling
    
    - Negative counts are treated as zero
    - Warning is issued when encountering negative counts

commit a2ee105a07b19c52efe7a3e6e5b11a27b4b60ef8 
Author: Paul Larson <plars@users.sourceforge.net>
Date:   Wed Jul 2 19:37:50 2003 +0000

    Small fixes before the release

commit 72860625dd904f84909253b20a7fc024b4e3377e 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon May 5 08:32:04 2003 +0000

    Adjusted example program and README file
    
    ... to reflect renaming of lcov option '--reset' to '--zerocounters'.

commit cbd9e315832960604d2949439326b30f4061e512 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Apr 30 15:47:51 2003 +0000

    Renamed lcov option '--reset' to '--zerocounters'
    
    - Included '--remove' in help text of lcov
    - Adjusted man pages to include option changes
    - Extended info() change to geninfo and genhtml (infos are now printed
      to STDERR)

commit 8155960cb5db0359470d2a5f652bdc744e9ecfcd 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Wed Apr 16 15:43:31 2003 +0000

    Modified read_gcov so that it can also parse the new gcov format which is to be introduced in gcc 3.3.

commit 382440f781b12ade8f1f7962a0eb1cfc0525f2a5 
Author: Paul Larson <plars@users.sourceforge.net>
Date:   Tue Apr 15 16:06:59 2003 +0000

    Added --remove option info() now prints to stderr

commit 62760fa1840326e849c7e58892ce671f510bb0af 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Mon Apr 14 09:31:51 2003 +0000

    Check-in of updated LCOV version (to be released as 1.1).
    
    Includes fixes and modifications by Mike Kobler, Paul Larson and
    myself.
    
    A quote from the CHANGS file:
    - Added CHANGES file
    - Added Makefile implementing the following targets:
      * install    : install LCOV scripts and man pages
      * uninstall  : revert previous installation
      * dist       : create lcov.tar.gz file and lcov.rpm file
      * clean      : clean up example directory, remove .tar and .rpm files
    - Added man pages for all scripts
    - Added example program to demonstrate the use of LCOV with a userspace
      application
    - Implemented RPM build process
    - New directory structure:
      * bin        : contains all executables
      * example    : contains a userspace example for LCOV
      * man        : contains man pages
      * rpm        : contains files required for the RPM build process
    - LCOV-scripts are now in bin/
    - Removed .pl-extension from LCOV-script files
    - Renamed readme.txt to README
    
    README:
    - Adjusted mailing list address to ltp-coverage@lists.sourceforge.net
    - Fixed incorrect parameter '--output-filename' in example LCOV call
    - Removed tool descriptions and turned them into man pages
    - Installation instructions now refer to RPM and tarball
    
    descriptions.tests:
    - Fixed some spelling errors
    
    genhtml:
    - Fixed bug which resulted in an error when trying to combine .info files
      containing data without a test name
    - Fixed bug which would not correctly handle data files in directories
      with names containing some special characters ('+', etc.)
    - Added check for empty tracefiles to prevent division-by-zeros
    - Implemented new command line option --num-spaces / the number of spaces
      which replace a tab in source code view is now user defined
    - Fixed tab expansion so that in source code view, a tab doesn't produce a
      fixed number of spaces, but as many spaces as are needed to advance to the
      next tab position
    - Output directory is now created if it doesn't exist
    - Renamed "overview page" to "directory view page"
    - HTML output pages are now titled "LCOV" instead of "GCOV"
    
    geninfo:
    - Fixed bug which would not allow .info files to be generated in directories
      with names containing some special characters
    
    lcov:
    - Fixed bug which would cause lcov to fail when the tool is installed in
      a path with a name containing some special characters
    - Implemented new command line option '--add-tracefile' which allows the
      combination of data from several tracefiles
    - Implemented new command line option '--list' which lists the contents
      of a tracefile
    - Implemented new command line option '--extract' which allows extracting
      data for a particular set of files from a tracefile
    - Fixed name of gcov kernel module (new package contains gcov-prof.c)
    - Changed name of gcov kernel directory from /proc/gcov to a global constant
      so that it may be changed easily when required in future versions

commit ec94ed71838a9780e82ea8bd67742bde2f4eeb47 
Author: Paul Larson <plars@users.sourceforge.net>
Date:   Fri Mar 7 20:28:15 2003 +0000

    Fix lcov.pl to work with the new gcov-kernel module
    
    ... ,documentation fixes in readme.txt

commit e70d9abdb60b83de7174815371259c63fa75bf76 
Author: Robert Williamson <robbiew@users.sourceforge.net>
Date:   Tue Feb 18 20:05:09 2003 +0000

    Applied patch from Mike Kobler:
    
    One of my source file paths includes a "+" in the directory name.  I found
    that genhtml.pl died when it encountered it. I was able to fix the problem
    by modifying the string with the escape character before parsing it.

commit 69ef6f1b607670589aae1ae1e6c78ef1b5d204e3 
Author: Peter Oberparleiter <oberpapr@users.sourceforge.net>
Date:   Fri Sep 6 09:04:34 2002 +0000

    Replaced reference to "cat" cvs directory
    
    ... and to .zip package.

commit c641f6e694e2bebf9ef0a507091460026463d169 
Author: Manoj Iyer <iyermanoj@users.sourceforge.net>
Date:   Thu Sep 5 19:14:51 2002 +0000

    Coverage analysis files.
    
    Peter worked on this version.

Sourceforge.net  Last modified on: December 20, 2016 - 14:22:05 UTC.
Theme: